MODEL/TP 16/350 FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 37 tons, Traction load 48 tons 4 × 6 traction – heavy duty suspension system. Modern Cabin: Single (1 + 2). High-power engine: up to 380 hp. Gear Box: Manual. Brakes: Heavy Duty – ABS. Water tank capacity: 35000 liter of […]
MODEL/TLF 30/60-DP500 FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 27 tons 4 × 6 traction – heavy duty suspension system. Modern Cabin: Single (1 + 2) – Double (1 +5). High-power engine: 440 hp at 16 hp per ton. Gear Box: Manual / Automatic. Brakes: Heavy Duty – ABS. Water […]
FIXED water monitor / Model: PROTECTOR RED # Z1121A With 4 ANSI 150 Inlet C/W INDUSTRIAL NOZZLE # ZN12A – TFT Monitor will supply with stainless steel built 2.5-inch ball valve + lever handle Port for Pressure gauge & drain valve Flow rate: up to 4500 lit /min (designed waterway gives delivery up to 1250 […]
FIRE-FIGHTING GLOVE DYNAMIC GRIP EN 659:2003+A1:2008 MED Five-finger firefighting glove for Fire Brigade. Back in 1.3 – 1.5 mm bovine nappa, flame resistant; palm, thumb and part of the index in KR 610 fabric 100% para-aramid fabric with polymeric coating highly resistant to abrasion, perforation and cutting, with high level of permeability to water and […]
FLAME RETARDANT BALACLAVA SS2 / EN 13911 Balaclava composed of flame retardant knit fabric produced with 200 g/m stretch system. The Balaclava is completely produced in double layer fabric that gives excellent comfort characteristics and an absence of both visual and auditory field. It has an elongation of the lower part in order to increase […]
Model: PROGRESS Tough, durable and very abrasion resistant. Resistance to oil, fuel and a wide range of chemicals (see resistance table in technical appendix). Resistance to heat, UV and ozone. Excellent adhesion between rubber and textile. No cleaning and drying required. 20, 25 & 30 meters (2.5 inch – 1.5 inch) are available Light alloy […]
MODEL: TS 8/8 Portable fire pump: Firefighting centrifugal pump connected to the engine by a switched single disc. The entire unit, consisting of the pump and engine, is mounted on portable frame. The unit is carried by the tubular frame with four handles. Holes in the bottom runners ensure that it can be stored securely […]
MODEL/ AMPHIBIO 1500 These pumps are designed to be applied in emergency conditions by fire brigades for pumping water into the tanks of fire engines from natural sources as well as for pumping water from flooded rooms and for emergency extinguishing with output capacity over 1000 lpm.