AWG BRANCHPIPE – CODE 4015 Water branch pipe – Five Stages Flow rate of 200 to 355 L / min pressure at 7 bars. Light alloy Morris Couplings 1.5- or 2.5-inch BSS336.
AWG FOAM NOZZLE – Code/ S2 Valid for all types of low diffusion foams (Fluor protein, FFFP, and AFFF Concentrates) with different concentrations 1%, 3% and 6% flow rate of at least 200 L / min at a pressure of 5: 7 bar. Is lightweight – made of stainless steel and withstands high shocks and […]
provides low diffusion foam to be fitted with 2.5-inch diameter fire hoses Heavy duty – for firefighting works according to international standards: drain rate of at least 400 L / min at 5 bar pressure – Foam expansion rate = 15: 1. equipped with a 2.5-inch (64 mm) entry hole – Morris model male BSS […]
AWG FOAM MIXER – Code/ Z4 – Number (10) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 400lpm @ 5 – 7 bars
AWG FOAM MIXER – Code/ Z2 – Number (5) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 200lpm @ 5 – 7 bars
FIXED water monitor / Model: PROTECTOR RED # Z1121A With 4 ANSI 150 Inlet C/W INDUSTRIAL NOZZLE # ZN12A – TFT Monitor will supply with stainless steel built 2.5-inch ball valve + lever handle Port for Pressure gauge & drain valve Flow rate: up to 4500 lit /min (designed waterway gives delivery up to 1250 […]
FIXED foam monitor / Model: POK # 21005 FLOW RATE (MONITOR): UP TO 2000 Liter /min at 7 bar FEEDIMG WATER: SOFT – SALT & BRACKISH WATER OPERATING PRESSURE: Up to 11 bar MAXIMUM PRESSURE: 16 bar HORIZONTAL MOVEMENT: 360 – manual by carrying handle & locking VIRTICAL MOVEMENT: From -50 to +90 – […]
Portable water monitor TFT / Model: CROSSFIRE # XFC-32 CROSSFIRE monitor can be used on fire truck or at process area; Portable – lightweight monitor package consists of: – Portable base with 2 inlets for fire hoses + Storage bracket; The device shall include an integral carrying handle, four folding stainless-steel legs with carbide spikes […]
Portable foam monitor / Model: POK # 37390 FLOW RATE (MONITOR): UP TO 3000 Liter /min at 7 bar FEEDIMG WATER: SOFT – SALT & BRACKISH WATER OPERATING PRESSURE: Up to 11 bar, MAXIMUM PRESSURE: 16 bar HORIZONTAL MOVEMENT: 360 – manual by carrying handle & locking VIRTICAL MOVEMENT: From +30 to +85 – […]
Model / TFT-ULTMIATE MONITOR COMBO Fixed water oscillating monitor with water jet/fog nozzle. Z0 Industrial Nozzle material made of hard coat anodized ANSI A356.0 T6 Aluminum (Long Life more than brass). The monitor and the nozzle are FM approved Hydrant Under Monitor 6″ ANSI with Internal Drain X No Side B, C1-4.0″ Storz with blind […]
Model / TFT-BLITZFIRE COMBINATION PACKAGE BLITZFIRE MONITOR PACKAGE — Flow range up to 500 gpm (2000 l/min). The monitor features low friction inlet and outlet pivots. Outlet has built-in stream shaper. Elevation is manually adjustable between 10° and 46° above horizontal. Horizontal rotation is manually adjustable 20° either side of center. The SAFETY SHUT-OFF VALVE […]
PROTEK 625-1 Produces effective sweeping water steam, designed for attack, cooling, protection and hazmat situations. Powered by a water-driven turbine that sweeps the outlet back and forth in a smooth and powerful motion while unmanned. As these monitors can be left unmanned, resources can be conserved for deployment in the other areas. The water-driven turbine […]
COMPLETE SC 469 PRO EN 469 (NEW) Fire-fighting Complete SC 469 PRO NEW 469:2007 – 1149-5 III Cat. Composed of jacket and over-trousers composed of n°4 layers thus assembled: First layer: in meta-aramid fabric Rip-Stop (rear resistant and hydro-oleo-repellent) ) antistatic 220 g / m² certified Oeko-tex®. The composition of the fabric is the following: […]
Firefighting Helmet Vulcan M CV102 (type B) The new helmet for Firefighters “VULCAN M CV102” has been designed and produced in accordance with directive 89/686 / EEC and MED, Certified according to EN 443: 2008, EN 16473: 2014, EN 16471: 2014. Made of the fight against fires and for rescue operations, the helmet was built […]
Model/ FHR003 These are rubber boots with electrical insulation properties (model FHR 003) and chainsaw cut protection (model FHR 004), equipped with a removable thermal insulation insert/sock. Upper fronts with a protective zone made of materials resistant to chainsaw cut at 28 m/s. EN 15090:2012 Footwear for firefighters EN 50321:1999 Electrically insulating footwear for working […]
Firefighting Boots FIREMAN – F1 type D EN 15090 Boots made of soft black leather thickness 2.0- 2.2 mm with water repellent treatment. Inner lining in Windrexv hypoallergenic, water-repellent, breathable fabric. Internal anti-perforation insole in multilayer MATRIX fabric (Kevlar), steel toecap. Internal Fousbet in Thinsulate. Non-slip rubber sole with particular sculpting that is excellent for […]
FIRE-FIGHTING GLOVE DYNAMIC GRIP EN 659:2003+A1:2008 MED Five-finger firefighting glove for Fire Brigade. Back in 1.3 – 1.5 mm bovine nappa, flame resistant; palm, thumb and part of the index in KR 610 fabric 100% para-aramid fabric with polymeric coating highly resistant to abrasion, perforation and cutting, with high level of permeability to water and […]
FLAME RETARDANT BALACLAVA SS2 / EN 13911 Balaclava composed of flame retardant knit fabric produced with 200 g/m stretch system. The Balaclava is completely produced in double layer fabric that gives excellent comfort characteristics and an absence of both visual and auditory field. It has an elongation of the lower part in order to increase […]