Comfortable harness for fall arrest, work positioning and suspension Ventral attachment point: attachment for a descender or a positioning lanyard for use in single mode Lateral attachment points: attachment for a positioning lanyard for use in double mode Sternal attachment point: fall arrest system attachment Dorsal attachment point: fall arrest system attachment Rear attachment point […]
Cabloc Vertical Cable System offers fall protection for workers whilst providing a functional and practical means of access and egress on structures such as wind turbines and communication towers. It can be permanently installed to a ladder or other vertical structure. Components are available in either stainless or galvanized steel options. Vertical Systems are designed […]
Horizontal lifeline systems that deliver mobility and fall protection for at height workers. The Horizontal Lifeline System can be used for either work restraint or fall arrest and is suitable for multiple applications. It allows users complete freedom of movement to carry out their work uninterrupted, in a continuous straight line and around corners, provided […]
Temporary Horizontal Lifeline These temporary safety systems are used to protect workers operating in the horizontal plane who may not have continuous access to suitable anchorage points. Our broad selection of horizontal lifelines offers significant advantages in safety and productivity and have been precision engineered for specific applications, including connection point, connection type and number […]
MODEL/TLF 30/60 FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 19 tons 2 × 4 or 4 × 4 traction heavy duty suspension system. Modern Cabin: Single (1 + 2) – Double (1 +5). High-power engine: 380 hp at 20 hp per ton. Gear Box: Manual / Automatic. Brakes: Heavy Duty […]
MODEL/TLF 30/40 FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 16 tons 2 × 4 or 4 × 4 traction heavy duty suspension system. Modern Cabin: Single (1 + 2) – Double (1 +5). High-power engine: 275 hp at 17 hp per ton. Gear Box: Manual / Automatic. Brakes: Heavy Duty […]
MODEL/TLF 1000 FF RANGE Chassis: Heavy Duty 2 x 4 – Payload up to 7 Ton. Modern Cabin: Single (1 + 2) – Double (1 +5). High-power engine: 146 hp at 20 hp per ton. Gear Box: Manual / Automatic. Brakes: Heavy Duty – ABS. Water tank capacity: 1000 liters and up to 2000 liters. […]
ARFF 7000 DP250 chassis: Heavy duty 4 × 4 – loads of up to 26 tons Engine: 540 HP – Pump & Roll water at 50 km / hr. Speed and acceleration: 0-80 km / h within 25 seconds – maximum speed: 115 km / h Gearbox: Automatic – 7 forward speeds + 1 reverse […]
ARFF 14000 DP250 Chassis: Heavy duty 6 × 6 – payload up to 39 tons Engine: Two (2) engines with a capacity of 540 hp, with a total capacity of 1080 hp Speed and acceleration 0-80 km / h within 20 seconds – maximum speed: 135 km / h Gear box: Automatic – pumping water […]
ARFF 19000 DP250 and more Chassis: Heavy duty 8 x 8 – load up to 52 tons Engine: (2) engines with a total capacity of 1080 HP Acceleration: is 80 km / h at 25 seconds at top speed: 135 km / h gear box: Automatic – pumping water while traveling up to 70 km […]
Villages fire engines MODEL/2000
FF RANGE Chassis: Designated for heavy duty firefighting - payload up to 6.3 tons 2 × 4 traction - heavy duty suspension system.
Modern Cabin: Single (1 + 2) plus (4 individuals cabin).
High-power engine: up to120 hp.
Gear Box: Manual 6 speeds other than reverse gear.
Brakes: Heavy Duty - Servo-complete.
Water tank capacity: 2000 liter of water (Foam tank / optional).
The tank material: stainless steel - high quality 316L.
Stationary fire pump: 1700 liter/min medium pressure.
Optional equipment: Stationary pump - top gun - blender - foam mixer.
Electrical preparations: all alarm systems, flashers and emergency
Fittings: Fire ladder - ejectors and others according to customer request.
MODEL/TLF 30/160 FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 34 tons 4 × 6 traction – heavy duty suspension system. Modern Cabin: Single (1 + 2) – Double (1 +5). High-power engine: 440 hp at 20 hp per ton. Gear Box: Manual / Automatic. Brakes: Heavy Duty – ABS. Water […]
MODEL/TP 8000L FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 18 tons 2 × 4 or 4 × 4 traction – heavy duty suspension system. Modern Cabin: Single (1 + 2). High-power engine: 275 hp at 15 hp per ton. Gear Box: Manual / Automatic. Brakes: Heavy Duty – ABS. Water […]
MODEL/TP 16/350 FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 37 tons, Traction load 48 tons 4 × 6 traction – heavy duty suspension system. Modern Cabin: Single (1 + 2). High-power engine: up to 380 hp. Gear Box: Manual. Brakes: Heavy Duty – ABS. Water tank capacity: 35000 liter of […]
MODEL/TLF 30/60-DP500 FF RANGE Chassis: Designated for heavy duty firefighting – payload up to 27 tons 4 × 6 traction – heavy duty suspension system. Modern Cabin: Single (1 + 2) – Double (1 +5). High-power engine: 440 hp at 16 hp per ton. Gear Box: Manual / Automatic. Brakes: Heavy Duty – ABS. Water […]
The new design of the Magirus turntable ladder. Magirus turntable ladders support fire brigades with practical details: The equipment space behind the cab has been optimised to provide 20% more storage space for expanded loads. An optional third entry to the equipment space offers perfect use of space and ergonomics. Ascents to the ladder set […]
ARTICULATED HYDRAULIC TURNTABLE LADDERS Telescopic fire ladders with a hinged connection AT/AS SERIES More outreach. More working height. More depth below ground level. More capabilities. Magirus turntable ladders with articulated arms and telescoping articulated arms go to work where conventional turntable ladders reach their limits: • Reaching emergencies in narrow city centres • Winding, contorted […]
Magirus Vario Jacking System It is the newest system in the world in terms of a new design, V-SHAPE, a system developed by MAGIRUS Wonderful twins to resist obstacles that may face the rescue operation (Narrow roads – Extending under vehicles – Ease of overtaking – Providing complete and safe stability on sloping and loose […]
Rescue vehicle – MODEL/RW 10C This superstructure concept features a walk-in tail equipment room at the rear instead of an equipment locker covered by a roller shutter. As many as four wheeled containers can be stored here. This means rescue vehicles can be equipped flexibly depending on the main vehicle’s mission or the season. The […]
Rescue vehicle – MODEL/RW2 HD CHASSIS: heavy duty 4 x 2 – 4 x 4 payload up to 16 tons. Modern cabin: single (1 + 2) – double (1 + 5). High power engine: up to 275 HP. Brakes: Heavy Duty – ABS. Fixed rescue preparations: Front winch – rear winch – generator – Telescopic […]
RESQTEC – Crib Block series Cribbing blocks are used for stabilization of an object or to support in lifting objects during rescue operations. The unique interlocking system of the Crib Blocks allow for creating a variety in stabilization structures with ease. Rapid and easy, they safe valuable time and make rescue saver: A must have […]
Jump Cushion -Model / life jump X-30 A Power Generator-Model / KH 8000 E LIFE JUMP X-30A has capacity to absorb a jumping person from up to 30 meters each 30 seconds giving a high possibility of survival in very dangerous environments, where other systems cannot grant an escape way. The construction of the LIFE […]
TIRFOR TU STANDARD-Model/TU 32
All devices manufactured of this type are tested in tension and lift orbits under an operating pressure of 125% of the specified capacity, and all attachments such as steel rope, hook and loop are tested under an operating pressure of up to 200% of their designated capacity.
Equipped with a system to protect against loads exceeding the permissible, due to the presence of a safety bolt that works when the load reaches 100% of the permissible load.
Carefully designed movable arms are perpendicular to the steel wire in-line, to ensure complete stability and to improve the tension and pull.
According to European Standard Specifications for Manufacturing Systems for Lifting and Tensioning Machines (2006/42 / CE)
CHAINSAW HUSQVARNA 592 XP® Experience the power of our new 90cc petrol chainsaw range! Husqvarna 592 XP is developed for professional forestry and tree care workers who demand the best in heavy-duty performance, reliable operation, and well-balanced manoeuvrability. Featuring AutoTune 3.0, this chainsaw starts easily and runs optimally in all conditions. The powerful X-Torq engine […]
Power Cutters Husqvarna K970 Robust, reliable, light and powerful – the K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions, withstanding climate and fuel variations. Suitable for road works when used with the corresponding KV 970 trolley. The trolley […]
Husqvarna K 970 Chain The Husqvarna K 970 Chain is a gas-driven power cutter with a diamond chain. It is based on the popular K 970 power cutter and includes all of its technical and ergonomic advantages. With a concrete chain saw, you get better access in tight situations, better control and avoid gyro forces […]
DOOR OPENER model/ Shilla (SL-700DF) A bag of break-in equipment is a hand lever that is used to break walls, ceilings and floors, break locks, door latches, and cut metal. The equipment is composed of a light metal body (Alloy Steel) and has a groove in which a metal arm (telescopic arm) moves.
LASER MONITORING DEVICE LEADER model/LEADER SENTRY WIRELESS Leader SENTRY is a stability monitor that detects the structural movements of an unstable building. Its laser continuously monitors detected movements and displays changes for real-time awareness. Leader SENTRY can detect a 1 mm structure movement at a distance of 50 m! A telescopic sight helps to point […]
RESQTEC Profix Max The Profix Max is an integrated and easy to use shoring device with a powerful 15 tons capacity at a safety factor 4:1. It can be operated manually, pneumatically and even hydraulic (in combination with the ram). With just a few struts and attachments unlimited applications are available. Use it for structural, […]
Search Camera with Communication Group LEADER Model/ LEADER CAM LEADER Cam is used during rescue operations to visually locate and Communicate with victims. The lightweight control box, linked to a flexible telescopic camera probe, Is designed to help in identifying with accuracy the positional location of buried victims in difficult to enter confined spaces, to […]
– ADVANCE BLADE DESIGN – THE EWO TECHNOLOGY – ARC MOVEMENT LIFTING CAPABILITY – ULTIMATE PRESSURE – CCC CAPACITY (COMPLEX CAR CONSTRUCTIONS) – UNIQUE OVAL (REINFORCE COMPLEX) SHAPE FOR NT RESQ BAGS ARAMID FABRICES According to the international standards (EN13204) – (NFPA1936)
RESQTEC FX2 FRONTLINER c/w Hand-Pump The hydraulic pressure is derived from the manual pump installed on the unit. It has the ability to double movement fast (open and return). The spacing between the two rams is not less than 25 cm. Maximum opening force up to 144K / Newton. Maximum cutting force up to 216KN. […]
RESQTEC HYDRAULIC RAMS/ RAM 2, RAM4 and Pump V2 RAM spreader The length of the end spacer when the individual is not less than 788 mm. The spacing distance (telescopic tide stroke) is not less than 18 + 307 mm. Payload (spacing force) of not less than 11.50 tons. According to the European standard EN13204 […]
NT BAGS-RESQTEC The bags are made of SUPER STRONG ARMED FIBERS reinforced rubber, with a hardness of 7 times more than steel fibers – a safety factor greater than 4 to 1 and are of unprecedented design and materials or produced by other companies.
RESQTEC SQ Bags bags: It consists of three air bags of different sizes and loads The bags are made of reinforced, reinforced, non-cutting rubber material, and both sides from the top and bottom are rough surfaces to resist and prevent slipping and are equipped with a distinctive mark on the two surfaces of the pillow […]
RESQTEC LP Bags Bags: It consists of three air bags of different sizes and loads The bags are made of a non-cut material, and both sides from the top and the bottom are rough surfaces to resist and prevent slipping.
A multi-purpose upper monitor MODEL/IM2 MVN The ejector provides a column of water / foam and is characterized by the ability to throw water / foam in various shapes. Column / spray – discharge rate up to 3000 liters / minute at a pressure of 10 bar. Distinguished by the ability to manually control the […]
Fixed mixing device MODEL/IFP 180 – 480 Around pump direct mixing system has the ability to rapidly generate foam from 180 Liter / min to 480 Liter / min. The device is compatible with all types of foaming liquids and Its concentrates. The ability to Control the mixing ratio 0-6%.
High pressure Reels MODEL/IM 38/60 Hose reel with a hose length of 60 meters and a diameter of (1) inch made of reinforced rubber. The hose is complete with multi-purpose column / spray / mist ejector. The discharge of 200 Liter / Min at a pressure of 40 bar. Extrusion range is not less than […]
Model/ EK (W) – N – FRITZ EMDE production (German Origin) *The portable device is portable on a solid chassis – heavy duty and operates with an electric motor 220 V – 50 Hz; ▪ Used to fill all types of dry chemical powder extinguishers of different capacities; ▪ an exit rate (packing capacity) of […]
The standard unit comprises a 120 liter foam concentrate tank. Hi-Combat UNI- 225 inductor and F225/HU low expansion foam branch pipe. Two 15m lengths of Dutch coiled 45mm diameter Dura line fire hose. Fitted with light alloy 21/2” instantaneous couplings to BS336. A shut off ball valve is also fitted to the inductor as standard, […]
Mobile Foam Units Model/ POK Code: P16064 Capacity of foam tank Not Less than 140 Liters, Tank made of high quality Material Resistant to Corrosion, and chemical Resistant (Polyethylene – Stainless steel – Fiber glass). The unit is equipped with foam Inductor made of (Stainless steel or Copper or Light alloy) Inductor with Flow rate […]
Is used in Portable & Wheeled Extinguishers, Mobile units, Dry powder fixed system installations, Twin application systems where Propellants used are nitrogen & CO2. Is suitable for risks of Class A, Class B, Class C, Class D and Class E fires. Is compatible with foams and other similar powders. European standard EN 3 &615
Model/ MONNEX Class BCE Powder Monnex™ dry chemical powder is recommended for large fires (Class B, C and E) where superior fire extinguishing qualities and reliable protection is of paramount importance. Monnex™ is particularly effective against fire involving L.N.G, alcohols, ketones and esters, which are more difficult for conventional firefighting agents. Manufacturing process and quality […]
(AFFF 3% OR 6%) KV-LITE AFFF is Aqueous Film Forming Foam concentrate (AFFF) has characteristic of film forming, KV-LITE AFFF is available in 3 % and 6 % concentrate. It can be used with fresh water or seawater. It is suitable for application with standard low expansion foam making equipment like in-line inductors, different types […]
(AR-AFFF 3×3% or 3×6%) KV-LITE AR-AFFF is an environmental friendly C6 based foam concentrate containing Fluorinated Surfactants, KV-LITE AR-AFFF is available in 3 x 3% and 3 x 6% concentrate. It can be used with fresh water as well as seawater. It is also available in Low Temperature Freeze Protected type. It is suitable for […]
Concentrate (FP 3% or 6%) KV-LITE FP is based on proteineous material, which gives good sealing and excellent burn back resistance. KV-LITE FP is available in 3 % and 6 % concentrate. It can be used with fresh water as well as sea water. It can be applied with the help of all types of […]
multi-pattern détentes for positive positioning of pattern, combination of fog and straight stream, superb wide fog pattern for optimum personal protection, flush without shutting down, standard optimum operating pressure 100 psi (7 bar), excellent performance at pressure of as low as 50 psi (3.5 bar), conforms to all aspects of NFPA 1964 (spray nozzles, shutoff […]
Protek’s multi-purpose nozzles are nozzles with both solid bore and fog stream capability, the nozzle offers the flexibility to flow both at the same time or independently, nozzles are capable of operating efficiently at pressures as low as 50 psi to reduce firefighting fatigue or up to 100 psi for maximum flow
Water multipurpose nozzle TFT – MODEL: THUNDERFOG – JTS250PS The Thunder fog Series of selectable gallonage 1½” and 2½” nozzles construction, reflective labeling, and stainless-steel components with a protective front rubber bumper. Flush without shutting down. Uniquely cut fixed fog teeth or optional stainless steel spinning teeth.
AWG BRANCHPIPE – CODE 4015 Water branch pipe – Five Stages Flow rate of 200 to 355 L / min pressure at 7 bars. Light alloy Morris Couplings 1.5- or 2.5-inch BSS336.
AWG FOAM NOZZLE – Code/ S2 Valid for all types of low diffusion foams (Fluor protein, FFFP, and AFFF Concentrates) with different concentrations 1%, 3% and 6% flow rate of at least 200 L / min at a pressure of 5: 7 bar. Is lightweight – made of stainless steel and withstands high shocks and […]
provides low diffusion foam to be fitted with 2.5-inch diameter fire hoses Heavy duty – for firefighting works according to international standards: drain rate of at least 400 L / min at 5 bar pressure – Foam expansion rate = 15: 1. equipped with a 2.5-inch (64 mm) entry hole – Morris model male BSS […]
AWG FOAM MIXER – Code/ Z4 – Number (10) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 400lpm @ 5 – 7 bars
AWG FOAM MIXER – Code/ Z2 – Number (5) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 200lpm @ 5 – 7 bars
FIXED water monitor / Model: PROTECTOR RED # Z1121A With 4 ANSI 150 Inlet C/W INDUSTRIAL NOZZLE # ZN12A – TFT Monitor will supply with stainless steel built 2.5-inch ball valve + lever handle Port for Pressure gauge & drain valve Flow rate: up to 4500 lit /min (designed waterway gives delivery up to 1250 […]
FIXED foam monitor / Model: POK # 21005 FLOW RATE (MONITOR): UP TO 2000 Liter /min at 7 bar FEEDIMG WATER: SOFT – SALT & BRACKISH WATER OPERATING PRESSURE: Up to 11 bar MAXIMUM PRESSURE: 16 bar HORIZONTAL MOVEMENT: 360 – manual by carrying handle & locking VIRTICAL MOVEMENT: From -50 to +90 – […]
Portable water monitor TFT / Model: CROSSFIRE # XFC-32 CROSSFIRE monitor can be used on fire truck or at process area; Portable – lightweight monitor package consists of: – Portable base with 2 inlets for fire hoses + Storage bracket; The device shall include an integral carrying handle, four folding stainless-steel legs with carbide spikes […]
Portable foam monitor / Model: POK # 37390 FLOW RATE (MONITOR): UP TO 3000 Liter /min at 7 bar FEEDIMG WATER: SOFT – SALT & BRACKISH WATER OPERATING PRESSURE: Up to 11 bar, MAXIMUM PRESSURE: 16 bar HORIZONTAL MOVEMENT: 360 – manual by carrying handle & locking VIRTICAL MOVEMENT: From +30 to +85 – […]
Model / TFT-ULTMIATE MONITOR COMBO Fixed water oscillating monitor with water jet/fog nozzle. Z0 Industrial Nozzle material made of hard coat anodized ANSI A356.0 T6 Aluminum (Long Life more than brass). The monitor and the nozzle are FM approved Hydrant Under Monitor 6″ ANSI with Internal Drain X No Side B, C1-4.0″ Storz with blind […]
Model / TFT-BLITZFIRE COMBINATION PACKAGE BLITZFIRE MONITOR PACKAGE — Flow range up to 500 gpm (2000 l/min). The monitor features low friction inlet and outlet pivots. Outlet has built-in stream shaper. Elevation is manually adjustable between 10° and 46° above horizontal. Horizontal rotation is manually adjustable 20° either side of center. The SAFETY SHUT-OFF VALVE […]
PROTEK 625-1 Produces effective sweeping water steam, designed for attack, cooling, protection and hazmat situations. Powered by a water-driven turbine that sweeps the outlet back and forth in a smooth and powerful motion while unmanned. As these monitors can be left unmanned, resources can be conserved for deployment in the other areas. The water-driven turbine […]
COMPLETE SC 469 PRO EN 469 (NEW) Fire-fighting Complete SC 469 PRO NEW 469:2007 – 1149-5 III Cat. Composed of jacket and over-trousers composed of n°4 layers thus assembled: First layer: in meta-aramid fabric Rip-Stop (rear resistant and hydro-oleo-repellent) ) antistatic 220 g / m² certified Oeko-tex®. The composition of the fabric is the following: […]
Firefighting Helmet Vulcan M CV102 (type B) The new helmet for Firefighters “VULCAN M CV102” has been designed and produced in accordance with directive 89/686 / EEC and MED, Certified according to EN 443: 2008, EN 16473: 2014, EN 16471: 2014. Made of the fight against fires and for rescue operations, the helmet was built […]
Model/ FHR003 These are rubber boots with electrical insulation properties (model FHR 003) and chainsaw cut protection (model FHR 004), equipped with a removable thermal insulation insert/sock. Upper fronts with a protective zone made of materials resistant to chainsaw cut at 28 m/s. EN 15090:2012 Footwear for firefighters EN 50321:1999 Electrically insulating footwear for working […]
Firefighting Boots FIREMAN – F1 type D EN 15090 Boots made of soft black leather thickness 2.0- 2.2 mm with water repellent treatment. Inner lining in Windrexv hypoallergenic, water-repellent, breathable fabric. Internal anti-perforation insole in multilayer MATRIX fabric (Kevlar), steel toecap. Internal Fousbet in Thinsulate. Non-slip rubber sole with particular sculpting that is excellent for […]
FIRE-FIGHTING GLOVE DYNAMIC GRIP EN 659:2003+A1:2008 MED Five-finger firefighting glove for Fire Brigade. Back in 1.3 – 1.5 mm bovine nappa, flame resistant; palm, thumb and part of the index in KR 610 fabric 100% para-aramid fabric with polymeric coating highly resistant to abrasion, perforation and cutting, with high level of permeability to water and […]
FLAME RETARDANT BALACLAVA SS2 / EN 13911 Balaclava composed of flame retardant knit fabric produced with 200 g/m stretch system. The Balaclava is completely produced in double layer fabric that gives excellent comfort characteristics and an absence of both visual and auditory field. It has an elongation of the lower part in order to increase […]
Carrying bag for equipment Equipment carrying bag made of tear-proof fabric in order to contain all the equipment and individual equipment of the Civil Protection. Composed of two separate compartments, the lower and the upper one.
Model: PROGRESS Tough, durable and very abrasion resistant. Resistance to oil, fuel and a wide range of chemicals (see resistance table in technical appendix). Resistance to heat, UV and ozone. Excellent adhesion between rubber and textile. No cleaning and drying required. 20, 25 & 30 meters (2.5 inch – 1.5 inch) are available Light alloy […]
Model: Titan Very lightweight and highly flexible (even at low temperature). Small coil diameter. Excellent resistance to weathering and ozone. Inner lining excellent resistant to sea water and a wide range of chemicals (see resistance table in technical appendix). Mildew and rustproof $ Easy to repair. Working pressure: Specifications apply only to the hose (medium […]
MODEL: TS 8/8 Portable fire pump: Firefighting centrifugal pump connected to the engine by a switched single disc. The entire unit, consisting of the pump and engine, is mounted on portable frame. The unit is carried by the tubular frame with four handles. Holes in the bottom runners ensure that it can be stored securely […]
MODEL/ AMPHIBIO 1500 These pumps are designed to be applied in emergency conditions by fire brigades for pumping water into the tanks of fire engines from natural sources as well as for pumping water from flooded rooms and for emergency extinguishing with output capacity over 1000 lpm.
MODEL/FireXtec Heavy duty firefighting and rapid reaction firefighting system Equipped with an electric cart – a multi-modal fire truck Water – foaming A foaming and carbon dioxide mixture Carbon dioxide The best solution for fighting and controlling fires in markets, commercial fairs, hotels, museums, exhibition halls, conference rooms, tourism facilities, factories and production lines.
COMPRESSOR MCH30 Open/ silent Vertical It gives a drain rate of not less than: 500 liters / minute. Multi-stage (cylinders): four stages for high pressures: 232 – 420 bar. Four (4) exits (2/200 bar – 2/300 bar): Filling Panel (4) outlets. An integrated operating and control panel from the origin of the device equipped with […]
AIR COMPRESSOR MCH 23 ERGO SH COLTRI SUB It gives a rate of discharge of: 320 liters / minute. Multistage (cylinders): three stages for high pressures: up to 300 bar. Equipped with all pressure gauges and operating indicators. Provided with means to control and control pressures. SAFETY VALVE available. Gasoline Engine Compressor – Heavy Duty […]
COMPRESSOR MCH 13 / 16 / 18 It gives a flow rate of 315 l / min. Multi-stage (cylinders): three stages for high pressures: 232-330 bar. Two (2) outlets (200 bar – 300 bar). An integrated operating and control panel equipped with all meters and operating indicators: Electric switchboard and complete with an hour meter. […]
COMPRESSORMCH 13/16/21/23 ET ERGO PRIME It gives a flow rate of 315 l / min. Multi-stage (cylinders): three stages. Charging pressure strength from (200 bar – 300 bar). The device is equipped with a modern control panel, including all indicators, counters, and operation keys. Quality Certificate UNI EN ISO 9001:2015 ENISO 12100:2010, EN 1012-1:2010, EN […]
COMPRESSOR MCH 26 / 32 ET COMPACT It gives a total flow rate of not less than 530 liters / minute. Multistage (cylinders): three stages of high pressure, not less than: 200 – 300 bar. 4 exits (2/200 bar – 2/300 bar): Filling Panel (4) outlets. Integrated operating and control panels from the device’s origin […]
Liquid fuel mechanical engine – heavy duty. The air fan is made of a treated metal alloy, which is highly durable, resistant to weathering and corrosion – has a long life. Propeller guns with a fully streamlined air-force design and high rates, in compliance with AMCA guidelines. The container metal chassis is made of a […]
Liquid fuel mechanical engine – heavy duty. The air fan (7 arms) is made of a treated metal alloy with great durability and resistance to weathering and corrosion – with a long life. Propeller weapons inside a container unit and weapons with a design that allows air to be propelled with full flow and high […]
Liquid fuel mechanical engine – heavy duty. The air fan (7 arms) is made of a treated metal alloy with great durability and resistance to weathering and corrosion – with a long life. Propeller weapons inside a container unit and weapons with a design that allows air to be propelled with full flow and high […]
Multi-Gas (1–4) Detector Gas Alert Max XT II %LEL(F) O2 H2S CO General Specifications: • Size 5.1 x 2.8 x 2.0 in. / 13.1 x 7.0 x 5.2 cm. • Weight 11.5 oz. / 328 g. • Typical battery life 13 hours @ 32ºF / 0ºC 8 hours @ -4ºF / -20ºC Recharges in 6 […]
Diffuser Type Multi-Gas (1–4) Detector BW™ Clip4 (O₂, LEL, H₂S, CO) General Specifications • Size 12.0 x 6.8 x 3.2 cm / 4.7 x 2.7 x 1.3 in. • Weight 233 g / 8.2 oz. • Temperature -20 to +50°C / -4 to +131°F. Standard Package Contents • Detector complete with sensors, stainless steel. Alligator […]
Diffuser Type HONEYWELL SINGLE-GAS DETECTOR BW Clip for H2 S or CO General Specifications • Size 1.6 x 2.0 x 3.4 in. / 4.1 x 5.0 x 8.7 cm. • Weight 3.2 oz. / 92 g. • Temperature H2 S: -40 to +122°F / -40 to +50°C CO: -22 to +122°F / -30 to +50°C […]
HONEYWELL GAS ALERT Diffuser Type Multi-Gas (1–4) Detector Gas Alert Micro Clip X3 %LEL(F) O2 H2S CO General Specifications: • Size 11.3 x 6.0 x 3.1 cm / 4.4 x 2.4 x 1.2 in. • Weight 6.3 oz. / 179 g. • Temperature -20 to +50°C / -4 to +122°F . • Typical battery life […]
HONEYWELL BW TECHNOLOGY Diffuser Type MULTI-GAS (1-4) DETECTOR Gas Alert Micro Clip XL %LEL(F) O2 H2S CO General Specifications • Size 4.4 x 2.4 x 1.2 in. / 11.3 x 6.0 x 3.1 cm. • Weight 6.7 oz. / 190 g. • Temperature -4 to +122°F / -20 to +50°C. • Typical battery life 18 […]
Diffuser Type General Specifications • Size 1-Series 2.75 x 2.6 x 0.9 in. / 7 x 6.65 x 2.4 cm 4-Series 2.75 x 2.6 x 1.2 in. / 7 x 6.65 x 3.0 cm. • Weight 3.3 oz. / 95g. • Typical battery life 12 months under normal operation. Features & Benefits • User-friendly operation […]
Bumping Type Honeywell BW™ Ultra 5-gas detector (O₂, LEL, H₂S, CO, VOCs) General Specifications • Size 5.8 x 3.3 x 1.6 in. / 14.8 x 8.5 x 4.0 cm. • Weight 14.5 oz. / 411 g (with clip) Operating -4 to +131° F / -20 to +50° C temperature. • Typical battery life 18 hours […]
Each Arc flash protective suit include (coat, bib trousers, hood and visor, face Shield, , pair of gloves and pair of Dielectric boot) ASTM F 1959, F1506, F2621 And NFPA 70 E Used For Protect against Electric Arc Flash, protecting Upper & lower body, neck, arms, legs to ankles Made from a light weight and […]
NOVAX CLASS 00:- 2,500 Volt Tested – 500 Volt Working NOVAX CLASS 0:- 5,000 Volt Tested – 1,000 Volt Working NOVAX CLASS 1:- 10,000 Volt Tested – 7,500 Volt Working NOVAX CLASS 2:- 20,000 Volt Tested – 17,000 Volt Working NOVAX CLASS 3:- 30,000 Volt Tested – 26,000 Volt Working NOVAX CLASS 4:- 40,000 Volt […]
EN ISO 20345:2011 For working environment with high voltage hazards Power stations operations Substation (step-up/step down/distribution) operations Electrical hazards with wet condition / water exposure High current leakage hazards Electrical installations
Safety shoes-Electrician workers Model/ COFRA –NEW ELECTRICAL EN ISO 20345:2004 طبقا للمواصفات القياسية Grain leather boot, breathable and water-repellent, color black, anti-shock, slipping resistant, nonmetallic APT Plate midsole. Key points: insole and sole are highly electric resistant. The whole boot has been designed in order not to have any metal parts; bellows tongue; padded […]
1” to 3” diameter – 25 mm to 76 mm 2” to 5” diameter – 51 mm to 12.7 cm 4” to 6-1/2” diameter – 10.2 cm to 16.5 cm 6” to 10” diameter – 15.2 cm to 25.4 cm 8” to 13” diameter – 20.3 cm to 33 cm
Safety Shoes – Office Model / PARIS – FLEX S3 طبقاً للمواصفات القياسية EN ISO 20345:2011 SRC Suitable for: Inside/Outside Type: Low shoe Activity: Services, Security, Office Upper: Black water resistant smooth full cow leather, very soft Lining: ON STEAM® dark grey perforated material, very comfortable, leather aspect Toe cap: Ultra-light & extra wide Composite […]
Safety Shoes – Half Boot: Model / LEIMEN S3 EN ISO 20345:2011 طبقاً للمواصفات القياسية Water repellent full grain leather and breathable textile DRYTHERM 100% polyamide fabric, ladder proof, breathable, antibacterial, it absorbs and releases the moisture, abrasion resistant
Ultra Fit S3 SRC Model Half Boot طبقا للمواصفات الفنية القياسية EN ISO 20345:2004(+A:2007) Made of full grain leather, 2.0mm thick Water Resistance Upper (WRU) leather Inspected and EN ISO 20345:2004 (+A:2007)) CE Mark Matches the S-3 SRA protection package Antistatic shoe: The electrical resistance between the ground and the foot is between 0.1-1000 mega […]
Ultra Fit S3 SRC Model office طبقا للمواصفات الفنية القياسية EN ISO 20345:2004(+A:2007) Safety shoes Ultra Fit S3 model – office EN20345:2011, S3 Protection S3 Oil resistance Antis slip, antistatic and Slip SRC Sole Penetration Resistant Stainless steel Shock Absorber Heel Water Resistant Upper Leather Breathable, Abrasion Resistant
ONESUIT® Shield إنتاج Saint Goban – منشأ North America Hazmat Suit – Class B Certified to CBRN first Response and Chemical splash standards NEPA 1994 CLASS 2 (2012 EDITION) NFPA 1992 (2012 EDITION)
Chemical Spill Kit designated as yellow in color, designed to absorb aggressive and non-aggressive liquids such as acids, caustics, oil coolants, solvents, water and solutions. Fast acting with high absorbency rates for larger chemical spills down to bench top laboratory situations. Contents include Kit Shoulder Bag, 2 Socks, 25 Pads, 1 Disposal Bag and 1 […]
Oil Only Spill Kit designated as white in color, designed to absorb and contain oils, fuels, solvents and most petrochemicals from land, but more specifically from water, as they will not absorb water. Contents include Kit Shoulder Bag, 2 Socks, 25 Pads, 1 Disposal Bag and 1 Instructions & Contents Card
Eye wash is a first aid item that is used at eyewash stations or in first aid kits. It is a cleanser for the eyes used in the event of a chemical eye injury involving acidic or alkaline substances or particles trapped in the eye. The purpose of the eyewash is to flush out harmful […]
For all industries and applications operating under the heat of the sun in hot climates, this self-draining safety shower with eye/face wash unit is ideal to protect workers at risk of exposure to hazardous contaminants. Any standing water left in the pipes after activation is drained away to prevent stagnant water overheating in the standpipe […]
3M™ DBI SALA® anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to tough environments. Anchorage connectors are a critical component in a fall protection system as they securely attach the users system to the anchorage. Your choice of anchor depends on the type of work being done. […]
Our anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of […]
Our anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of […]
With a vacuum anchor lifeline system at your workers’ side, they can anchor to virtually any smooth, non porous surface simply by flipping a switch and waiting for the green light. So whether they need to repair a skylight atop a locomotive or repaint a section on a water tower, they’ll always be able to […]
Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanentor portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) […]
Reusable swiveling quad-pod roof anchor with swiveling self-retracting lifeline bracket and fasteners for flat or sloped wood roofs. Our anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components […]
PROTECTA-Tripod model/ AM 100 Winch model/ AT200-120 The tripod has three telescopic legs and is equipped with chains to ensure that it is not released, and at the end of each leg there is a small free-moving base for fixing an anti-slip and secured with chains to stabilize the three legs when using to achieve […]
3M™ DBI-SALA® Confined Space 5-Piece Davit Hoist System is the industry gold standard for manhole and confined space entry and retrieval applications. Built tough with lightweight materials including high-strength aluminum, the davit pivots for better rescue angles, and can easily adjust for overhead clearance restrictions.
Safety Belt for Rescue EN813 Suspension straps – adjustable seat belts, seat belts – middle – chest – buckle Shoulder Pads Extra-large, comfortable, lightweight and breathable shoulder and back padHip Padding Softer and more durable hip padding for extra comfort
Welders harness is specifically designed to resist potential heat damage experienced in welding applications. Highly durable, heat resistant and flame retardant webbing combined with a lightweight design provides the ideal body support solution for welding at height. The large rear D-ring allows for an easier connection, and the chest strap is ideally placed for connection […]
PROTECTA 5009129 Positioner lanyard Extended with automatic braking with Diameter 10.5 mm to 2 m Carbineer & Fast lock steel AJ565 Includes a sharp edge protection cover
Self-Retracting Lifeline (PROTECTA) “Variety of height from 6m to 80 m, web or cable ur Protecta® personal self retracting lifelines (SRL’s) represent a major improvement in economy line SRL’s. Employers can economically replace simple lanyards with the versatility and added safety of a 6 ft. (1.8m) SRL. Protecta® personal SRL’s are ergonomically designed for ease […]
Ultra Lok™ self retracting lifelines (SRL’s) are rugged, yet extremely lightweight and superbly engineered devices you can count on for safety, efficiency and comfort. Stainless steel components, an anti ratcheting brake system and a semi sealed design provide the user with a system built to last. Our SRLs are backed by decades of proven field […]
3M™ DBI-SALA® Sealed-Blok™ Self Retracting Lifeline, RSQ™ Retrieval, Cable Variety of height web or cable These Sealed-Blok™ self retracting lifelines (SRL’s) incorporate a patented concept that separates all dynamic components, including the motor spring and brake, from foreign elements such as grease, moisture and dirt. You can always trust your SRL to work at peak […]
The confined space pole hoist attaches with a carabiner on the universal bracket to a suitable anchor point, allowing you to work in any direction from any angle. It has a unique swivel head that rotates 360 degrees, providing flexibility in both vertical and horizontal confined space entries. Two systems that adjust from either 4 […]
It is made with a particularly robust and durable plastic on which has undergone a special thermal treatment that improves the elastic memory feature. It is revolutionary because it is the only recovery stretcher which can be stored in a backpack when not in use. It guarantees a notable degree of immobilization, protection and safety […]
3M™ DBI-SALA® Netting System Debris/Personnel Net With the 3M™ DBI-SALA® Adjustable Net , four net sizes adjust to fit any size or shaped environment, eliminating the need for numerous multiple sized nets, reducing inventory and costs. Shrink the adjustable net down for compact areas or expand to full size. Snap them together for the largest […]
(SCBA) Honeywell Aeris Confort Type 2 Non-metallic, ergonomic, flexible back plate. Three carry handles and attachment point for lifeline. Comfort cushions on the shoulders and waist belt straps made of aramid fiber. The cylinder capacity is 7 liter, pressure of 300 bar or 9 liter, pressure of 300 bar. According to European standard specifications EN […]
(SCBA) DIABLO ADVANCED TYPE 2 Materials used are not likely to cause allergies or irritations to the Wearer’s skin. Good adaptability to most faces. The cylinder capacity is 6.8 liter, pressure of 300 bar or 9 liter, pressure of 200 bar. Leakage less than 0.05% corresponding to a protection factor of Over 2000. According to […]
HONEYWELL Model: Aeris Mini SX-PRO EN PANO Light weight 3,5 kg + mano, heat resistance with pressure gauge. Volume 3 liters, Pressure 200 bar as minimum. Duration 15 min. Adjustable harness strap can be worn around the neck, chest, shoulder and waist. With added connection to connect with main air supply operated when main air […]
DPI PRODUCTION MODEL: EEBD SNM SEKUR NAVY MASK SNM provides breathable air contained in a cylinder through a pneumatic system which adjusts quantity and pressure of air so to make all parameters suitable for breathing. This is a steel cylinder with a 3 lt. hydraulic capacity, working pressure of 200 bar, 15 minute duration. According […]
Emergency Breathing Apparatus Bio-S-Cape steel MFG: HONEYWELL The Bio-S-Cape is a compressed air emergency escape breathing device designed to offer easy donning, combined with optimal respiratory protection It is contained in a bag for carrying which, when opened, automatically triggers the supply of breathable air from the cylinder. Overpressure maintained inside the hood eliminates any […]
Emergency Breathing Apparatus SNC EEBD SEKUR NAVY CAP DPI PRODUCTION The constant flow air supply is automatically activated upon opening the bag; through a quick release pin fitted to the pressure reducing valve and attached to the bag; providing a rapid immediate operation use in hazards aerobic events. CE certified – EN1146
Full face piece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate Particulate Filters or Cartridges, to help provide respiratory protection against particulates and/or a variety of gases and vapors. Along with a wide lens for visibility and eye protection. Available verity of types & models
Reusable Half Face Mask has a bayonet-style twin-filter design that fits a broad range of lightweight filters. Medium/large-size reusable mask has a Cool Flow™ Valve, a soft sealing surface for comfort, and a unique head harness with an optional drop-down strap design. Available verity of types & models
Products are classified by filtering efficiency and maximum total inward leakage performance (FFP1, FFP2 and FFP3), also by usability and clogging resistance. Performance tests in this standard include filter penetration; extended exposure (loading) test; flammability; breathing resistance and total inward leakage. Reusable products are also subjected to cleaning, storage and mandatory clogging resistance tests (clogging […]
Use for solid particulates and liquid mists in concentrations not exceeding 10X PEL/OEL Use for certain metal fumes from welding, brazing, cutting, and heating of metals. Always follow User Instructions and use in manners as indicated Available verity of types & models
3M 501 Filter Retainer – Container For Prefilters 3M 501 Filter Retainer (Pair) – Filter Container For Prefilters! Use when you need to apply particulate protection to existing 3M 6000/7500 cartridges The retainer holds prefilters that can then be connected to the cartridges Use with Prefilters P1-3M5911 | P2-3M5925 | P3-3M5935 […]
3M™ Gas, Vapour and Particulate Filter A1E1HgP3R, 6096 Trapezoidal gas, vapour and particle filters combine outstanding protection with excellent wearing comfort Light, low breathing resistance, even weight distribution when attached to the mask Provides excellent field of view due to the special trapezoidal shape Filters can be easily attached with a twist by means of […]
3M 6038 P3R HF Filter Provide protection against solid and liquid particles and hydrogen fluoride Offer relief from nuisance level organic vapours and acid gases The filter media is encapsulated in a robust plastic case that allows the filters to wiped clean Clever design allows for easy fit check – simply squeeze the filters to […]
3M Filter 6035 P3R – particulate protection only Quick and easy filter assembly description the 3M ™ particle filter 6035 in a plastic housing has protection level P3R. Thanks to the robust housing, it is suitable for particularly tough working conditions. It protects against solid and liquid particles. The filter fits on the 6000, 7000 […]
3M™ Particulate Filter 2138, GP2/GP3, with Nuisance Level Organic Vapour/Acid Gas Relief Provides protection against: Particulates (P2/P3*), Ozone and Nuisance Level** Acid Gas & Organic Vapours with Low Vapour Pressure. * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. […]
3M™ Particulate Filter 2128, GP2, with Nuisance Level Organic Vapour/Acid Gas Relief Provides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: – With a 3M 6000/7500 Series […]
3M 2135 Particle filter P3R Provides protection against: Particulates (P2/P3*). *Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. Common Applications/Hazards: For protection against toxic particles such as asbestos (refer to local government guidelines). Also for mould remediation and Beryllium […]
3M™2125 P2 R Particulate Filter 3M™ P2 R Particulate Filters 2125 protect against fine dusts and oil/water based mists. Suitable for use with all 3M half and full face masks. protection against solid and liquid particles Protect against fine dusts and oil/water based mists 3M™ Bayonet Connection: Flexible system for connection to 3M half and […]
3M 5935 P3 Particulate Prefilters For 6000 7500 Series Masks twin filter full face/half Masks Combine with 3M gas and vapour filters for added particulate protection using the 3M 501 filter retainer Type P3 cartridge protects against: Dust and particles, High efficiency, High capacity Colour coded to European standards EN14387 and EN143 Must be used […]
3M 5925 P2 Particulate Prefilters For 6000 7500 Series Masks 3M 5925 P2 Particulate Prefilters For 6000 7500 Series Masks twin filter full face/half Masks Combine with 3M gas and vapour filters for added particulate protection using the 3M 501 filter retainer Type P2 cartridge protects against: Dust and particles, Medium efficiency, Medium capacity Colour […]
3M™ 6075, A1+Formaldehyde Filter Provides protection against: Organic Vapours (boiling point > 65ºC) and Formaldehyde (A1Form) The 3M™ Cartridges 6000 Series attaches to the 3M™ Half and Full face respirators, they are lightweight and well balanced when fitted to the respirator. 3M™ Bayonet Connection System ensures precise and secure locking Low profile and well balanced […]
3M 6059 Filter against organic, inorganic and acid gases ABEK1 The 3M Gas and Combi Filter 6059 has the protection level ABEK1 and offers protection against organic, inorganic and acid gases, ammonia and organic ammonia derivatives. The filter fits onto the 6000, 7000 and 7500 mask series from 3M with a bayonet click connection Properties: […]
The 3M™ Gas and Vapour Filter 6054 offers K1 protection against ammonia and its derivatives. Suitable for 3M™ Reusable Half and Full Face Masks featuring the 3M™ Bayonet Filter Connection System. Gas and Vapour Filter 6054 offers K1 protection against ammonia and its derivatives Lightweight, low breathing resistance, well balanced when fitted to mask Provides […]
Product information “3M 6055 A2 filter / 3M 06915 A2 filter against organic gases and vapors” The 3M gas and combination filter 6055 has protection level A2 and offers protection against organic gases and vapors. The filter fits on the 6000, 7000 and 7500 mask series from 3M using a bayonet click connection User-friendly bayonet […]
Protect against organic vapours with boiling points above 65°C 3M™ Bayonet Connection: Flexible system for connection to 3M half and full face masks Also available with an End of Service Life Indicator, please see 6055i Lightweight with low breathing resistance Bayonet-style connection fits a wide range of half and full-face 3M™ Reusable Masks Twist and […]
3M 6098 AXP3R Combination Filter Cartridge For 6000 7500 Series Twin Filter Full Face/Half Masks Type AXP3R cartridge protects against: Organic Compounds, Dust and Particles, High efficiency, High capacity Colour coded to European standards EN14387 and EN143
3M 6098 AXP3R Combination Filter Cartridge For 6000 7500 Series Twin Filter Full Face/Half Masks Type AXP3R cartridge protects against: Organic Compounds, Dust and Particles, High efficiency, High capacity Colour coded to European standards EN14387 and EN143
Trapezoidal gas, vapour and particle filters combine outstanding protection with excellent wearing comfort Light, low breathing resistance, even weight distribution when attached to the mask Provides excellent field of view due to the special trapezoidal shape Filters can be easily attached with a twist by means of a bayonet click connection 3M™ 6096A filter […]
Provides protection against: Organic Vapours (boiling point > 65ºC) and Formaldehyde (A1Form) The 3M™ Cartridges 6000 Series attaches to the 3M™ Half and Full face respirators, they are lightweight and well balanced when fitted to the respirator. 3M™ Bayonet Connection System ensures precise and secure locking Low profile and well balanced twin filter design Suitable […]
The 3M Gas and Combi Filter 6059 has the protection level ABEK1 and offers protection against organic, inorganic and acid gases, ammonia and organic ammonia derivatives. The filter fits onto the 6000, 7000 and 7500 mask series from 3M with a bayonet click connection Properties: User-friendly bayonet-click connection system Innovative filter technology Available in all […]
Protect against organic vapours with boiling points above 65°C, inorganic and acid gases 3M™ Bayonet Connection: Flexible system for connection to 3M half and full face masks Designed to optimise your field of vision Lightweight with low breathing resistance Bayonet-style connection fits a wide range of half and full-face 3M™ Reusable Masks Twist and click […]
The 3M™ Gas and Vapour Filter 6054 offers K1 protection against ammonia and its derivatives. Suitable for 3M™ Reusable Half and Full Face Masks featuring the 3M™ Bayonet Filter Connection System. Gas and Vapour Filter 6054 offers K1 protection against ammonia and its derivatives Lightweight, low breathing resistance, well balanced when fitted to mask Provides […]
Product information “3M 6055 A2 filter / 3M 06915 A2 filter against organic gases and vapors” The 3M gas and combination filter 6055 has protection level A2 and offers protection against organic gases and vapors. The filter fits on the 6000, 7000 and 7500 mask series from 3M using a bayonet click connection User-friendly bayonet […]
Protect against organic vapours with boiling points above 65°C 3M™ Bayonet Connection: Flexible system for connection to 3M half and full face masks Also available with an End of Service Life Indicator, please see 6055i Lightweight with low breathing resistance Bayonet-style connection fits a wide range of half and full-face 3M™ Reusable Masks Twist and […]
Provides protection against: Particulates (P2/P3*). *Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. Common Applications/Hazards: For protection against toxic particles such as asbestos (refer to local government guidelines). Also for mould remediation and Beryllium Made from 3M high performance […]
3M™ P2 R Particulate Filters 2125 protect against fine dusts and oil/water based mists. Suitable for use with all 3M half and full face masks. protection against solid and liquid particles Protect against fine dusts and oil/water based mists 3M™ Bayonet Connection: Flexible system for connection to 3M half and full face masks Flexible enough […]
Quick and easy filter assembly description the 3M ™ particle filter 6035 in a plastic housing has protection level P3R. Thanks to the robust housing, it is suitable for particularly tough working conditions. It protects against solid and liquid particles. The filter fits on the 6000, 7000 and 7500 mask series from 3M by means […]
Extremely versatile glove ideal for meticulous tasks Open back style allows the skin to breathe and keeps hands cool and comfortable Provides excellent dexterity and good protection against abrasion and tear hazards palm coating enables superb grip in both wet and dry conditions Seamless knitted liner provides extra comfort Close fitting design makes it extremely […]
Great for general handling of dilute chemicals, solvents, animal fats, alkalis and petroleum related products Flock lined for increased wearer comfort Ideal for the printing industry, janitorial, food processing and chemical handling Soft and flexible with good dexterity despite providing exceptional protection Food tested and approved Sandy, roughened finish to palm and fingertips to improve […]
STROM CLASS 00:- 2,500 Volt Tested – 500 Volt Working STROM CLASS 0:- 5,000 Volt Tested – 1,000 Volt Working STROM CLASS 1:- 10,000 Volt Tested – 7,500 Volt Working STROM CLASS 2:- 20,000 Volt Tested – 17,000 Volt Working STROM CLASS 3:- 30,000 Volt Tested – 26,000 Volt Working STROM CLASS 4:- 40,000 […]
Great for general handling of dilute chemicals, solvents, animal fats, alkalis and petroleum related products Flock lined for increased wearer comfort Ideal for the printing industry, janitorial, food processing and chemical handling Soft and flexible with good dexterity despite providing exceptional protection Food tested and approved Sandy, roughened finish to palm and fingertips to improve […]
Unique finger protection against hammer impacts. Yarn composition provides a thin, comfortable glove with high dexterity. High cut resistance with moderate heat protection. High performance back of hand impact protection. Yarn composition provides a thin, comfortable glove with high dexterity High cut resistance with moderate heat protection. Available verity of types & models
Against hydraulic jets from a pinhole of 0,3mm, standard clean hydraulic oil at room temp,. 250 bar pressure, 1 second exposure time, and pinhole direct contact to glove and a contact force of ~3N. The penetrating power of a hydraulic jet will vary considerably depending on hydraulic oil properties,. distance from pinhole, diameter of hole, […]
Thin glove for high frequency and impacting tools Long lasting and excels in oily environments. High comfort vibration reducing glove for high frequency and impacting tools Educational print in palm with high grip winter lining with membrane in back of Hand. Available verity of types & models
Thin and warm with brushed inside for maximum comfort. High dexterity and durability in cold environments. Reflective print for maximum visibility. Optimized for oily and cold environments. High comfort and cut resistance in a thin glove. High dexterity and durability in cold environments. Available verity of types & models
Certified as food safe. Washable. I Good insulation against cold. Well suited for use underneath disposable gloves or rubber gloves. Blue color for easy identification. HPPE Steel and fiberglass provide very high cut level. Available verity of types & models
Anti-dust lenses can benefit individuals in a variety of ways: Vision is clearer without the haze of dust particles covering the surface of your glasses Your eyes will be less irritated as dust repellent lenses will reduce the amount of dust and dirt building up near the eyes Glasses are easier to clean when they […]
Protective Eyewear is an economical way to guard against small flying objects. Featuring an impact-resistant polycarbonate lens and integral side shields, these safety glasses help provide eye protection for both non-employee personnel and workers engaged in general tasks. Ultra-wraparound frame Side, top and bottom shield Design Available verity of types & models
Premium Line Safety Spectacles combining both an attractive and modern styling with a wraparound design for increased wearer confidence. This sporty design combined with high functionality ensures high wearing acceptance, while the closely fitting form offers best all round protection. The adjustable handle length allows for individual adjustment, making them ideal for use in construction, […]
Welding Goggles (3M). High-wrap safety goggles available with a superior anti-scratch and anti-fog coatings for increased durability and vision. Our goggles feature a modern, slim design and a wide, nylon elastic strap for easy adjustability. For eye protection with an excellent field of vision and reduced fogging in hot or humid conditions, slim-design safety goggles […]
Get improved safety and greater eye protection, Affordable Protection Safety Glasses. Anti-scratch/ Anti-fog/. Our unisex safety glasses feature a sleek, wraparound design with integral side shields and brow guard for better safety and protection. The lightweight frame fits snugly against the face for better coverage, field of vision and comfort. These glasses have strong, polycarbonate […]
Wrap-Around Comfort All-rounder with a panoramic visual field! Wrap-around and free from any visual interference offers 180° all-round vision and high optical quality. The option of swapping the temples for an adjustable strap and foam edge means is a highly versatile model. Upper protection All-round vision Non-slip bridge Comfortable, non-slip straight temples Temple or strap […]
Hybrid Safety Goggles Hybrid Safety Goggles Clear Lens, utilizes the same lens as the safety glasses in order to provide a good field of view and excellent coverage. This lightweight low profile goggle variant is fitted with an adjustable headband and foam surround and provides additional protection against liquid droplets. The high performance ventilation system […]
This innovating coating is an effective solution for all activities that alternate exposure to bright light and low light, while also being suitable for extreme temperature environments. Ideal for cold and hot countries, from the Far East to Siberia! CSP technology to filter blue light (52%) is combined with the exclusive, coating, to sustainably combat […]
3M™ PELTOR™ Optime™ 105 Earmuffs Over-the-Head, Hard Hat Attached, Behind-the-Head Earmuffs are a type of personal protective equipment (PPE) that is used to protect the wearer’s ears from excessive noise pollution, dust or temperature variations, especially cold. They are made of thermoplastics and sponge and are shaped like a pair of cups. These cups are […]
Ear Plug (3M). Ear plugs are a device inserted into the ear to prevent loud noise or the intrusion of water, foreign bodies, dust, cold and strong wind from entering the ear. They are primarily used to prevent hearing damage caused by loud noises encountered with power tools or heavy machinery in a work environment. […]
3M™ Speedglas™ Welding Helmet SL, with Auto Darkening Filter, 701120 3M™ Speedglas™ Welding Helmet SL, 701120 has a narrow design that’s 25 % lighter than any other Speedglas model. Our welding helmet is suitable for quick welding tasks with a motion sensor that automatically turns on the welding filter when you pick up the helmet. […]
“3M” PELTOR – RED INDICATOR HELMET ABS helmet with ventilation in the helmet shell and special shape for hearing protector. Has 30 mm. slot, It gives a very stable fit by means of the two cavities in the helmet shell. Solaris UV indicator on the back of the helmet. When it is new the indicator […]
PZL-Starto Helmet Yellow 65061010 The STRATO helmet is very lightweight and comfortable, thanks to its CENTERFIT and FLIP&FIT systems, which guarantee that the helmet fits securely on the head. The adjustable-strength chinstrap makes it ideal for both work at height and on the ground. The unventilated outer shell protects against electrical hazards, molten metal splash […]
Protecting oneself against abrasions, impact injuries and the sun. The bump caps can be individually embroidered according to your needs. Also, offer high wear comfort and can be used in a wide range of operation purposes.
Δ Unified construction for indoor and outdoor use, for all WTMD models Δ New integrated design Δ Total mechanical compatibility with current IP20 (plastiand IP65 (stainless steel) control units: ∂ Dimensional ∂ Installation ∂ Wiring ∂ Chip card Δ Waterproof / Dustproof: IP rating IP66 compliant Δ UL 94 flame retardant – UL Flame Class […]
Hand-held metal detector scan surface with both audible and silent vibrating alarm options and extended battery life. Detects ferrous, non-ferrous and stainless steel weapons, contraband, and other metallic objects. Large Scan Surface 20.3 cm. Sharp audible alarm and bright red LED with optional vibration mode Secure Internal Sensitivity Adjustment Rugged, high-impact ABS case with reinforced […]
• Automatic discrimination of organic, inorganic and mixed materials by colorization • It exports to a secure VMI encrypted viewing application • Network connection • Real-time scanning • Self-diagnosis system • Color inversion • Real-time image manipulation • Automatic detection algorithm for drugs, explosives and high density materials • Storage capacity over 200,000 images • […]
ThreatScan®-LS1 is a lightweight, portable, battery powered x-ray scanning system designed in cooperation with first responders and EOD teams to meet the needs of the field operative. Quick and simple to deploy, the system produces high quality real-time x-ray images for rapid and accurate decision making. The slim detector panel is positioned behind the target; […]
Bomb Suit, designed to give the highest level of protection with the maximum comfort and flexibility to the user. The ballistic levels and materials used in the various components of Bomb Disposal Suit are tested and evaluated to the full quality assurance standards laid down by the appropriate Government organizations. The Suit ensemble is strong […]
Bomb Trailer, with rotating opening. Remotely operated opening and closing, pressurizing and decompressing of seals. Rated explosive capacity of 5 kg TNT-equivalent. Gas-tight with total containment of chemical and biological agents as well as the effects from explosions and toxic materials, such as shock wave and light fragments. You get a mobile system with high […]
MINI ROBOT A medium-sized, two-man carried UGV. Is a highly mobile, all-weather system capable of operating in any terrain. Incorporates best in class day and night vision modules that expedite IEDD search and CBRN survey operations. The long reach of the 6 DOF manipulator allows it to effectively search/access a broad spectrum of environments, therefore […]
A robust “wheeled trolley” under vehicle mirror, specifically designed and developed with security personnel in mind, for searching the underside of vehicles. A large unbreakable polycarbonate mirror provides a wide angle image, illuminated by a powerful 12 volt 8 watt fluorescent tube. The “T” handle, which assists in tilting the mirror, is telescopic and folds […]
