Concentrate (FP 3% or 6%) KV-LITE FP is based on proteineous material, which gives good sealing and excellent burn back resistance. KV-LITE FP is available in 3 % and 6 % concentrate. It can be used with fresh water as well as sea water. It can be applied with the help of all types of […]
multi-pattern détentes for positive positioning of pattern, combination of fog and straight stream, superb wide fog pattern for optimum personal protection, flush without shutting down, standard optimum operating pressure 100 psi (7 bar), excellent performance at pressure of as low as 50 psi (3.5 bar), conforms to all aspects of NFPA 1964 (spray nozzles, shutoff […]
Protek’s multi-purpose nozzles are nozzles with both solid bore and fog stream capability, the nozzle offers the flexibility to flow both at the same time or independently, nozzles are capable of operating efficiently at pressures as low as 50 psi to reduce firefighting fatigue or up to 100 psi for maximum flow
Water multipurpose nozzle TFT – MODEL: THUNDERFOG – JTS250PS The Thunder fog Series of selectable gallonage 1½” and 2½” nozzles construction, reflective labeling, and stainless-steel components with a protective front rubber bumper. Flush without shutting down. Uniquely cut fixed fog teeth or optional stainless steel spinning teeth.
AWG BRANCHPIPE – CODE 4015 Water branch pipe – Five Stages Flow rate of 200 to 355 L / min pressure at 7 bars. Light alloy Morris Couplings 1.5- or 2.5-inch BSS336.
AWG FOAM NOZZLE – Code/ S2 Valid for all types of low diffusion foams (Fluor protein, FFFP, and AFFF Concentrates) with different concentrations 1%, 3% and 6% flow rate of at least 200 L / min at a pressure of 5: 7 bar. Is lightweight – made of stainless steel and withstands high shocks and […]
provides low diffusion foam to be fitted with 2.5-inch diameter fire hoses Heavy duty – for firefighting works according to international standards: drain rate of at least 400 L / min at 5 bar pressure – Foam expansion rate = 15: 1. equipped with a 2.5-inch (64 mm) entry hole – Morris model male BSS […]
AWG FOAM MIXER – Code/ Z4 – Number (10) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 400lpm @ 5 – 7 bars
AWG FOAM MIXER – Code/ Z2 – Number (5) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 200lpm @ 5 – 7 bars
