RESQTEC HYDRAULIC RAMS/ RAM 2, RAM4 and Pump V2 RAM spreader The length of the end spacer when the individual is not less than 788 mm. The spacing distance (telescopic tide stroke) is not less than 18 + 307 mm. Payload (spacing force) of not less than 11.50 tons. According to the European standard EN13204 […]
NT BAGS-RESQTEC The bags are made of SUPER STRONG ARMED FIBERS reinforced rubber, with a hardness of 7 times more than steel fibers – a safety factor greater than 4 to 1 and are of unprecedented design and materials or produced by other companies.
RESQTEC SQ Bags bags: It consists of three air bags of different sizes and loads The bags are made of reinforced, reinforced, non-cutting rubber material, and both sides from the top and bottom are rough surfaces to resist and prevent slipping and are equipped with a distinctive mark on the two surfaces of the pillow […]
RESQTEC LP Bags Bags: It consists of three air bags of different sizes and loads The bags are made of a non-cut material, and both sides from the top and the bottom are rough surfaces to resist and prevent slipping.
A multi-purpose upper monitor MODEL/IM2 MVN The ejector provides a column of water / foam and is characterized by the ability to throw water / foam in various shapes. Column / spray – discharge rate up to 3000 liters / minute at a pressure of 10 bar. Distinguished by the ability to manually control the […]
Fixed mixing device MODEL/IFP 180 – 480 Around pump direct mixing system has the ability to rapidly generate foam from 180 Liter / min to 480 Liter / min. The device is compatible with all types of foaming liquids and Its concentrates. The ability to Control the mixing ratio 0-6%.
High pressure Reels MODEL/IM 38/60 Hose reel with a hose length of 60 meters and a diameter of (1) inch made of reinforced rubber. The hose is complete with multi-purpose column / spray / mist ejector. The discharge of 200 Liter / Min at a pressure of 40 bar. Extrusion range is not less than […]
Model/ EK (W) – N – FRITZ EMDE production (German Origin) *The portable device is portable on a solid chassis – heavy duty and operates with an electric motor 220 V – 50 Hz; ▪ Used to fill all types of dry chemical powder extinguishers of different capacities; ▪ an exit rate (packing capacity) of […]
The standard unit comprises a 120 liter foam concentrate tank. Hi-Combat UNI- 225 inductor and F225/HU low expansion foam branch pipe. Two 15m lengths of Dutch coiled 45mm diameter Dura line fire hose. Fitted with light alloy 21/2” instantaneous couplings to BS336. A shut off ball valve is also fitted to the inductor as standard, […]
Mobile Foam Units Model/ POK Code: P16064 Capacity of foam tank Not Less than 140 Liters, Tank made of high quality Material Resistant to Corrosion, and chemical Resistant (Polyethylene – Stainless steel – Fiber glass). The unit is equipped with foam Inductor made of (Stainless steel or Copper or Light alloy) Inductor with Flow rate […]
Is used in Portable & Wheeled Extinguishers, Mobile units, Dry powder fixed system installations, Twin application systems where Propellants used are nitrogen & CO2. Is suitable for risks of Class A, Class B, Class C, Class D and Class E fires. Is compatible with foams and other similar powders. European standard EN 3 &615
Model/ MONNEX Class BCE Powder Monnex™ dry chemical powder is recommended for large fires (Class B, C and E) where superior fire extinguishing qualities and reliable protection is of paramount importance. Monnex™ is particularly effective against fire involving L.N.G, alcohols, ketones and esters, which are more difficult for conventional firefighting agents. Manufacturing process and quality […]
(AFFF 3% OR 6%) KV-LITE AFFF is Aqueous Film Forming Foam concentrate (AFFF) has characteristic of film forming, KV-LITE AFFF is available in 3 % and 6 % concentrate. It can be used with fresh water or seawater. It is suitable for application with standard low expansion foam making equipment like in-line inductors, different types […]
(AR-AFFF 3×3% or 3×6%) KV-LITE AR-AFFF is an environmental friendly C6 based foam concentrate containing Fluorinated Surfactants, KV-LITE AR-AFFF is available in 3 x 3% and 3 x 6% concentrate. It can be used with fresh water as well as seawater. It is also available in Low Temperature Freeze Protected type. It is suitable for […]
Concentrate (FP 3% or 6%) KV-LITE FP is based on proteineous material, which gives good sealing and excellent burn back resistance. KV-LITE FP is available in 3 % and 6 % concentrate. It can be used with fresh water as well as sea water. It can be applied with the help of all types of […]
multi-pattern détentes for positive positioning of pattern, combination of fog and straight stream, superb wide fog pattern for optimum personal protection, flush without shutting down, standard optimum operating pressure 100 psi (7 bar), excellent performance at pressure of as low as 50 psi (3.5 bar), conforms to all aspects of NFPA 1964 (spray nozzles, shutoff […]
Protek’s multi-purpose nozzles are nozzles with both solid bore and fog stream capability, the nozzle offers the flexibility to flow both at the same time or independently, nozzles are capable of operating efficiently at pressures as low as 50 psi to reduce firefighting fatigue or up to 100 psi for maximum flow
Water multipurpose nozzle TFT – MODEL: THUNDERFOG – JTS250PS The Thunder fog Series of selectable gallonage 1½” and 2½” nozzles construction, reflective labeling, and stainless-steel components with a protective front rubber bumper. Flush without shutting down. Uniquely cut fixed fog teeth or optional stainless steel spinning teeth.
AWG BRANCHPIPE – CODE 4015 Water branch pipe – Five Stages Flow rate of 200 to 355 L / min pressure at 7 bars. Light alloy Morris Couplings 1.5- or 2.5-inch BSS336.
AWG FOAM NOZZLE – Code/ S2 Valid for all types of low diffusion foams (Fluor protein, FFFP, and AFFF Concentrates) with different concentrations 1%, 3% and 6% flow rate of at least 200 L / min at a pressure of 5: 7 bar. Is lightweight – made of stainless steel and withstands high shocks and […]
provides low diffusion foam to be fitted with 2.5-inch diameter fire hoses Heavy duty – for firefighting works according to international standards: drain rate of at least 400 L / min at 5 bar pressure – Foam expansion rate = 15: 1. equipped with a 2.5-inch (64 mm) entry hole – Morris model male BSS […]
AWG FOAM MIXER – Code/ Z4 – Number (10) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 400lpm @ 5 – 7 bars
AWG FOAM MIXER – Code/ Z2 – Number (5) The foam Mixers are designed to feed foam concentrates at a set mixing rate into the hose line. A mixing rate between 0% and 6% is possible. Output rate 200lpm @ 5 – 7 bars
FIXED water monitor / Model: PROTECTOR RED # Z1121A With 4 ANSI 150 Inlet C/W INDUSTRIAL NOZZLE # ZN12A – TFT Monitor will supply with stainless steel built 2.5-inch ball valve + lever handle Port for Pressure gauge & drain valve Flow rate: up to 4500 lit /min (designed waterway gives delivery up to 1250 […]
FIXED foam monitor / Model: POK # 21005 FLOW RATE (MONITOR): UP TO 2000 Liter /min at 7 bar FEEDIMG WATER: SOFT – SALT & BRACKISH WATER OPERATING PRESSURE: Up to 11 bar MAXIMUM PRESSURE: 16 bar HORIZONTAL MOVEMENT: 360 – manual by carrying handle & locking VIRTICAL MOVEMENT: From -50 to +90 – […]
Portable water monitor TFT / Model: CROSSFIRE # XFC-32 CROSSFIRE monitor can be used on fire truck or at process area; Portable – lightweight monitor package consists of: – Portable base with 2 inlets for fire hoses + Storage bracket; The device shall include an integral carrying handle, four folding stainless-steel legs with carbide spikes […]
Portable foam monitor / Model: POK # 37390 FLOW RATE (MONITOR): UP TO 3000 Liter /min at 7 bar FEEDIMG WATER: SOFT – SALT & BRACKISH WATER OPERATING PRESSURE: Up to 11 bar, MAXIMUM PRESSURE: 16 bar HORIZONTAL MOVEMENT: 360 – manual by carrying handle & locking VIRTICAL MOVEMENT: From +30 to +85 – […]
Model / TFT-ULTMIATE MONITOR COMBO Fixed water oscillating monitor with water jet/fog nozzle. Z0 Industrial Nozzle material made of hard coat anodized ANSI A356.0 T6 Aluminum (Long Life more than brass). The monitor and the nozzle are FM approved Hydrant Under Monitor 6″ ANSI with Internal Drain X No Side B, C1-4.0″ Storz with blind […]
Model / TFT-BLITZFIRE COMBINATION PACKAGE BLITZFIRE MONITOR PACKAGE — Flow range up to 500 gpm (2000 l/min). The monitor features low friction inlet and outlet pivots. Outlet has built-in stream shaper. Elevation is manually adjustable between 10° and 46° above horizontal. Horizontal rotation is manually adjustable 20° either side of center. The SAFETY SHUT-OFF VALVE […]
PROTEK 625-1 Produces effective sweeping water steam, designed for attack, cooling, protection and hazmat situations. Powered by a water-driven turbine that sweeps the outlet back and forth in a smooth and powerful motion while unmanned. As these monitors can be left unmanned, resources can be conserved for deployment in the other areas. The water-driven turbine […]
COMPLETE SC 469 PRO EN 469 (NEW) Fire-fighting Complete SC 469 PRO NEW 469:2007 – 1149-5 III Cat. Composed of jacket and over-trousers composed of n°4 layers thus assembled: First layer: in meta-aramid fabric Rip-Stop (rear resistant and hydro-oleo-repellent) ) antistatic 220 g / m² certified Oeko-tex®. The composition of the fabric is the following: […]
Firefighting Helmet Vulcan M CV102 (type B) The new helmet for Firefighters “VULCAN M CV102” has been designed and produced in accordance with directive 89/686 / EEC and MED, Certified according to EN 443: 2008, EN 16473: 2014, EN 16471: 2014. Made of the fight against fires and for rescue operations, the helmet was built […]
Model/ FHR003 These are rubber boots with electrical insulation properties (model FHR 003) and chainsaw cut protection (model FHR 004), equipped with a removable thermal insulation insert/sock. Upper fronts with a protective zone made of materials resistant to chainsaw cut at 28 m/s. EN 15090:2012 Footwear for firefighters EN 50321:1999 Electrically insulating footwear for working […]
Firefighting Boots FIREMAN – F1 type D EN 15090 Boots made of soft black leather thickness 2.0- 2.2 mm with water repellent treatment. Inner lining in Windrexv hypoallergenic, water-repellent, breathable fabric. Internal anti-perforation insole in multilayer MATRIX fabric (Kevlar), steel toecap. Internal Fousbet in Thinsulate. Non-slip rubber sole with particular sculpting that is excellent for […]
FIRE-FIGHTING GLOVE DYNAMIC GRIP EN 659:2003+A1:2008 MED Five-finger firefighting glove for Fire Brigade. Back in 1.3 – 1.5 mm bovine nappa, flame resistant; palm, thumb and part of the index in KR 610 fabric 100% para-aramid fabric with polymeric coating highly resistant to abrasion, perforation and cutting, with high level of permeability to water and […]
FLAME RETARDANT BALACLAVA SS2 / EN 13911 Balaclava composed of flame retardant knit fabric produced with 200 g/m stretch system. The Balaclava is completely produced in double layer fabric that gives excellent comfort characteristics and an absence of both visual and auditory field. It has an elongation of the lower part in order to increase […]
Carrying bag for equipment Equipment carrying bag made of tear-proof fabric in order to contain all the equipment and individual equipment of the Civil Protection. Composed of two separate compartments, the lower and the upper one.
Model: PROGRESS Tough, durable and very abrasion resistant. Resistance to oil, fuel and a wide range of chemicals (see resistance table in technical appendix). Resistance to heat, UV and ozone. Excellent adhesion between rubber and textile. No cleaning and drying required. 20, 25 & 30 meters (2.5 inch – 1.5 inch) are available Light alloy […]
Model: Titan Very lightweight and highly flexible (even at low temperature). Small coil diameter. Excellent resistance to weathering and ozone. Inner lining excellent resistant to sea water and a wide range of chemicals (see resistance table in technical appendix). Mildew and rustproof $ Easy to repair. Working pressure: Specifications apply only to the hose (medium […]
MODEL: TS 8/8 Portable fire pump: Firefighting centrifugal pump connected to the engine by a switched single disc. The entire unit, consisting of the pump and engine, is mounted on portable frame. The unit is carried by the tubular frame with four handles. Holes in the bottom runners ensure that it can be stored securely […]
MODEL/ AMPHIBIO 1500 These pumps are designed to be applied in emergency conditions by fire brigades for pumping water into the tanks of fire engines from natural sources as well as for pumping water from flooded rooms and for emergency extinguishing with output capacity over 1000 lpm.
